AAC production Line AAC Plant(sand lime brick)

1) Our equipments produce AAC sand lime brick
Aerated concrete block material with cement,lime, gypsum and quartz sand,aluminum foam, It is a fine porous block after the steam pressure curing , the specifications for 600mm x (200, 250, 300(100) mm * 150, mm, 200). According to the different density mainly, aerated concrete block specifications are B05, B06 two levels, the average compressive strength is not less than 2.5 MPa and 3.5 Mpa, respectively. The thermal conductivity is less than 0.13 W / mK and 0.16 W / mK.

2) Technology Orientation of our equipment
Production and application of aerated concrete has a history more than 40 years in China. Viewing from technology point, high quality products can use 3mm special sand slurry technology to meet the construction requests and 50% energy saving goals. (When mortar joint is less than 3mm, take thermal conductivity coefficient of wall as 1; when mortar joint is more than 3mm, take thermal conductivity coefficient of wall as 1.5). Based on the history of the aerated concrete development, only high quality products can bring a prosperous market.

3) Production of our equipment specification
Products conform to requirement of 04~07 grade blocks stated in GB11968-2006.
General Specifications of Aerated Concrete Blocks

Working Principle:

Technical Parameter:
 
The formulation of aerated concrete of 600kg/m3 absolute dry volume weight is:
Sand : Quick Lime : Cement : Gypsum = 68 : 20 : 10 : 2
Aluminum accounts for 0.074% of the total volume of dry materials;
Ratio of water to material: 0.6~0.65.
 

 Application Range:

Autoclaved Aerated Concrete, AAC Production Line, AAC Plant used for products of AAC.