Lightweight Concrete Blocks AAC Block Production Line  AAC Block Making Plant

AAC (Autoclaved Aerated Concrete) Introduction

      Autoclaved Aerated Concrete, also known as Aircrete, is a lightweight, load-bearing, high-insulating, durable building product, which is produced in a wide range of sizes and strengths.AAC offers incredible opportunities to increase building quality and at the same time reduce costs at the construction site. AAC is produced out of a mix of quartz sand and/or pulverised fly ash (PFA), lime, cement, gypsum/anhydrite, water and aluminium and is hardened by steam-curing in autoclaves. As a result of its excellent properties, AAC is used in many building constructions, for example in residential homes, commercial and industrial buildings, schools, hospitals, hotels and many other applications.

      It has light ,keeping temperature , Environmental protection,can’t burn and other advantages. It has a wide prospect of market.it is the main building material in the future. As normally, concrete density is usually 1600-2400kg/m³,but aerated concrete are 500kg/m³,600kg/m³,700kg/m³.It has not the big grain and use silicon material (for example: fly ash,sand,stone dust and others ),through making the material small for example sand, they can be used directly if has enough degree of small (for example fly ash, Mixing calcium material lime, cement, water to a special ratio, then add the aluminum dust and the additive, then Make the aluminum dust and the special ratio have a Chemical reflect. then produce Hydrogen to make the concrete slop to expanding or swell and foam. Next put them into the curing room to concreting cutting steaming curing, At last, there will become the light brick and the porous rate is 70-80%

About the raw material ratio of AAC block :

Cement lime fly ash style aerated block raw material proportion 

Cement lime Sand style aerated block raw material proportion

Reference: cement is 42.5 Portland or 42.5 common cement

Aluminum power paste calculate to use according to 600kg/m³ 
Remark: the accurate batching rate is adjustable according to the raw material locally

Why you choose the AAC block production line?

1. Light weight

2. Thermal Insulation

3. Sound proof

4. Resistant of earthquake

5. Floor Space Area

6. Saving cost

7. Fire Resistant

8. Durability

9. Green for Manufacturing,transportation

How AAC (Autoclaved Aerated Concrete) production line working ?

1. raw materials batching
2. Feed raw materials into the pouring mixer and evenly mixing
3. Poured the slurry into the mould
4. Static stop and pre-curing under a certain temperature, the slurry become a big block
5. The big block had a certain of hardness, then be hanged for 90 degree by turning hoister
6. Open the mould and de-moulding ,The big block will sit on the one side plate
7. and also 8 :Horizontal cutting the big block

     9. Vertical cutting the big block

    10. Hanging semi-product to hardening car

    11. Entering autoclave

    12. hardening

    13. leaving autoclave

    14. Hanging and stacking of end products

    15.loading and packing

Our factory is professional manufacturer of autoclaved aerated concrete (AAC) plants for more than 10 years, and we can supply complete set of autoclaved aerated concrete plant with capacity of 30 000m³, 100 000 m³, 150 000 m³, 200 000 m³, 250 000 m³, 300 000 m³ annually, including plant design, equipment installation, technical support, personal training and also can design and manufacture as per clients' requirement and so on.

It is a new type and environmental construction material, with the features of lightweight sound insulation,permeability,green,economics are widely used for the 

industrial and civil building construction.