High Price Performance AAC Block Machinery AAC Block Production Line / AAC Block

What is AAC (Autoclaved Aerated Concrete) ?

1. Autoclaved Aerated Concrete block is one kind of environmental Block. AAC was perfected in the mid-1920s by the Swedish architect and inventor Dr. Johan Axel Eriksson, working with Professor Henrik Kreuger at the Royal Institute of Technology. It went into production in Sweden in 1929 in a factory in Hallabrottet and quickly became very popular. In the 1940s, the trademark Ytong was introduced, and was often referred to as "blue concrete" in Sweden due to its blueish tinge.It used siliceous (fly ash, sand, slag) and calcareous (lime & cement) as the main raw materials, which through the process of batching, pouring, pre-curing, cutting, autoclaving, separating and packing to make into the final products.
2. AAC block can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),they could be used industry building and common building. AAC Block is the most mature technology of production and application in the worldwide nowadays.

.

How AAC (Autoclaved Aerated Concrete) production line working ?

1. First of all, dosing of the stored raw materials
2. Feed raw materials into the pouring mixer and evenly mixing
3. Poured the slurry into the mould
4. Static stop and pre-curing under a certain temperature, the slurry become a big block
5. The big block had a certain of hardness, then be hanged for 90 degree by turning hoister
6. Open the mould and de-moulding ,The big block will sit on the one side plate
7. and also 8 :Horizontal cutting the big block

     9. Vertical cutting the big block

    10. Hanging semi-product to hardening car

    11. Entering autoclave

    12. hardening

    13. leaving autoclave

    14. Hanging and stacking of end products

    15. loading and packing

About the raw material ratio of AAC block :

Cement lime fly ash style aerated block raw material proportion

Cement lime Sand style aerated block raw material proportion

Reference: cement is 42.5 Portland or 42.5 common cement

Aluminum power paste calculate to use according to 600kg/m³ 
Remark: the accurate batching rate is adjustable according to the raw material locally

Feature of AAC:

1. Thermal Insulation

It has highest thermal rating in the industry….R30! Thus provides well insulated interiors, keeping out warm air in summer and cold air in winters. AAC reduces Air conditioning cost by 30%. 

2. Sound proof

AAC wall has an excellent sound Transmission class (STC) ,rating of 44. Result: Virtually Soundproof   Interiors!

3. Resistant of earthquake

Earthquake forces on structure are proportional to the weight of the building, hence AAC shows excellent resistant to earthquake forces. Regions of high seismic activity like Japan exclusively use AAC. It has been proven to withstand wind loads of category 5 tropical storms.

4. Floor Space Area

Use of thinner blocks (6" instead of 9" exterior walls) because of its excellent water barrier & insulation properties leads to an increase in floor space area between 3-5%.

5. Saving cost

Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving.Being 8 times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus an overall mortar saving up to 66%.Its automatic manufacturing process gives AAC an exceptional dimensional accuracy & smooth surfaces, eliminating need of three-coat plaster walls and allows for a final 6 mm skim coat (putty/POP).

6. Fire Resistant

Best in class fire rating of 4 hours. The melting point of AAC is over 1600 ºc, more than twice the typical temperature in a building fire of 650 ºc.

Our service:

1. Production Line Design.
 drawing of plant working process , drawings of land construction, drawings of power working,drawings of driving force for working, drawings of anti-dust, drawings of water supply and drainage, and drawing of air pipeline construction.

2. Technical Guidance of Building Factory
consultation of facility, Equipment installation guide, constitution the production preparation, etc.

3. Providing the technical information of setting up factory
part of the factory management system, all posts accountability of production line, process rules, safety rules, setting a quota of staff and posts, pre-production tools directory, laboratory instruments, product catalogs, and test methods.